Furness Railway Trust blog

We are afraid that we have to start this week’s blog with more bad news for, as some of you will already be aware, Alan Middleton was admitted to Blackpool Victoria Hospital on Wednesday evening. He is currently in the Acute Medical Unit suffering from confirmed coronavirus. Alison is in enforced isolation at Thornton Cleveleys and is, as I am sure you will understand, very frustrated. The good news is that Alan appeared to be a little better today when he was visited by son, Andrew, and grandson, Sam. Seems he was complaining about too much salt on his food, which can only be a good sign! Fortunately the latest tests have concluded that there are no other underlying symptoms on his lungs other than coronavirus. We wish Alan well and our thoughts are with both Alan and Alison at this distressing time.

Needless to say, the current emergency has very much dampened the Trust’s activities at Preston. We received news that Embsay did not now foresee a need for 5643 in the immediate future and so arrangements have  been made for it to return to Preston, provisionally this Thursday. We had not been planning for this eventuality so Tim, Keith  and Ade spent quite some time last Wednesday with a tape measure before coming up with a plan to squeeze the loco into the main shed area so that some TLC can be given to its brakes, pistons and valves.

The other main task on Wednesday was to refit the springs on to FR 20’s tender in order to make it mobile. This had to be achieved carefully without scratching the newly completed paintwork, so a thin polythene screen was mounted to protect it. The new lifting table proved to be invaluable.

It is planned that the tender will take the place of Caliban‘s boiler on road two of the shed whilst the boiler will once again be exiled outside the shed. After arranging for the removal of the  ballast packer to the Ribble Rail shed there should now be room for Fluff on road four in the unheated part of the shed, but with only six inches to spare.

Ade appeared on Sunday to start the first part of the shunt but was thwarted when he found diesel shunter Stanlow with a broken fuel line. This was temporarily fixed today and so Ade and the Ribble Rail people should be able to do the necessary preparatory work before Thursday.

There has been some further work by Phil and John Davis on Fluff‘s superstructure as pictured here.

Looking forward it is essential that working members put their own safety first and follow the Government’s advice. It is far better that we are all in one piece at the end of this emergency than to risk health through feeling the need to make short term progress. Any working parties should be kept to the minimum number of people required and self distancing must be observed at all times. For those who do attend, a new signing in point has been created in the FRT shed in order to eliminate the need for members to visit any other buildings on the site.

 

We are sorry to have to start this week’s blog with the sad news which broke on Friday that the Appleby Training and Heritage Centre has closed after losing the necessary funding to enable it to continue its educational training. It is understood that the 14 staff there will be made redundant. As many of you will be aware, the Trust’s second class North London Railway coach was restored at the Centre from 2002 to 2003 with the aid of a Heritage Lottery Fund grant. Subsequently, the Centre very kindly allowed Trust volunteers to return the FRT’s Great Eastern Railway Royal Saloon No. 5 to serviceable condition in the Centre’s polytunnel from 2009 to 2010. Both projects saw considerable input from members who regularly travelled over to Appleby during these periods and we will always remember the friendly and very helpful working relationship that we had with the staff at the Centre. This led to the Trust’s GWR ‘Hall’ class 4-6-0 No. 4979 Wootton Hall being put in prominent storage on the Centre’s site alongside the Settle & Carlisle Line from March 2007 until October 2014. Our heartfelt commiserations go out to the staff at Appleby.

News from Embsay is that 5643 passed its steam test on Friday. However, Keith brought back the news that work is necessary on the brakes and that the locomotive’s front end will require to be stripped down to undertake an examination of the valves and pistons to rectify steam leakage. The implications of this outcome are still to be discussed and an action plan developed.

Back at Preston John Dixon continued his work to clean up the inside of FR 20’s tender tank and Tim has almost completed the painting of the tender frames.

Ade and Alan conducted some further work on FR 20’s boiler on Wednesday after which Andy Booth appeared on Friday to follow up a few areas to make the boiler ready for its hydraulic test in the presence of the boiler surveyor. This is now being arranged.

With much of the work on Fluff‘s chassis now complete, Phil and John Davis have commenced the task of fitting some of the superstructure.

Fred appeared on Friday and was kept busy with a paint brush on some of Fluff‘s platework.

Looking forward, the Ribble Steam Railway’s operating season starts on Sunday with Cream Teas being served on Mother’s Day trains. Alison (who had another birthday last Friday) tells us that all the teas have sold out.

Finally, despite the Coronavirus outbreak, working parties at Preston are planned to continue. Members are asked, for their own safety and that of others, to observe the precautions published by the Government. Further information on Coronavirus is available here.

There was a certain amount of jubilation on Wednesday when Fluff was finally lowered back onto its springs. However, given the current Coronavirus health advice, John Davis and Phil Bell decided to avoid the high fives and went for the now more fashionable touching of elbows.

The lowering of Fluff has not been without its issues for somebody had left a tool box under the loco which now looks a little worse for wear!

Fred applied some gloss black paint to the sand boxes on Friday.

Roger coated the lower part of the back cab with primer.

Alan and Ade spent Wednesday raising pressure on FR 20’s boiler and got it up to 200 psi before making a note of a few areas of dampness that need to be attended to.

Tim continued to paint FR 20’s tender frames whilst John Dixon decided to spend some time in self isolation, cleaning out the tender tank.

There has been more progress on Wootton Hall with some new firebox cladding appearing for fitting.

The Ribble Steam Railway has recently received a large collection of OO gauge locomotives and coaches of both two and three rail operation. These are being sold to members in the Exploration Centre to raise funds this Wednesday between 8 am and 4 pm.

Finally, news from Embsay is that 5643’s steam test for the boiler surveyor is now scheduled for this Friday 13th March.

 

It has been another week of birthday cake and presents.

Ade celebrated his birthday on Wednesday and is seen here cutting the cake kindly supplied (again) by Alison. There was some pressure on members to eat up by the end of Friday as we still hadn’t managed to entirely demolish the two cakes from the previous week! (You’re slipping! Ed.)

Keith received a late birthday present in that the long-awaited newly manufactured sets of valves and crossheads for Wootton Hall from Tyesley arrived on Tuesday.

These were followed on Thursday by the six Armstrong Oiler pads for the tender axle boxes which opens the way for Wootton Hall‘s tender frames to be placed back on their wheels.

Much of Friday was then spent in lowering Fluff‘s frames back on to its wheels. The springs have still to be fitted after which it will be possible to move the chassis.

Another step forward in FR 20’s overhaul was made last Wednesday when the boiler was filled with water. One of the tubes needed some attention from Matt Jervis (pictured), but on the whole things looked to be satisfactory. It is hoped to be able to start to raising some pressure over the next week or so.

Finally John Dixon has been fitting some new copper pipework to FR 20’s tender braking system and Tim has been busy painting the tender frames.

We’ve been busy again…!

Keith has cut out the holes in Fluff‘s rear upper cab plate and Phil Bell has been busy making the final adjustments and fitting the brass-rimmed windows.

Fred has been cleaning up the sand box linkage and is seen here persuading a stubborn nut to move.

John Davis has been cleaning up the sand box outlet flanges.

The search for a replacement engine for Fluff continues and Nigel Harris kindly put out a plea on Twitter for people to let us know of any that might be available. One respondent helpfully suggested that we  look at barn sales for agricultural machinery that might possess a suitable Fowler Sanders engine, in particular a gyrotiller. Let us know if you see anything that might be of use…

FR 20’s boiler is now ready to receive some water when we can get it close to the water pipe in the Ribble Rail shed. Tim and John Dixon varnished FR 20’s tender water tank on Friday and John is seen checking for any stray varnish dribbles from the many rivet heads, which are undoubtedly the bane of any painter’s life!

Wednesday saw Keith and Ade head off to Leyland to pick up the newly acquired fire pump and accessories. The RSR, which ran a half term steam service that day, had an overwhelming response from the public, so it took some time to find space for Ade to unload the kit with the forklift truck.

There is no news yet as to the date for 5643’s steam test at Embsay. Please note that there may not be a working party at Preston this Saturday as Keith is otherwise engaged on a steam trip.

There seems to have been a spate of birthdays lately and Alison kindly provided celebratory cakes for Keith and Alan. David Rimmer is seen wielding a knife to one of them under Alan’s watchful eye.

 

A landmark stage in the overhaul of FR 20 was achieved when the dome was finally lifted into position by the Ribble Steam Railway’s track maintenance vehicle’s hi-ab.

Ade is seen making sure that the dome fits neatly into position.

Alan looks as if he has just popped up out of the boiler as he attends to the securing nuts.

John has been preparing the last of the boiler blanks in readiness for some water to be put into the boiler.

Painting of the tender has continued with the left hand side of the tank now showing off its new coat of paint.

Fred and Alan Ogden have been wrestling to free the mechanism on the second of Fluff‘s sand boxes.

More new platework for Fluff‘s rear cab sheet has been cut out and Phil Bell has been drilling some more holes.

With the new steel cut, Keith prepares to chop the old cab plate ready for the skip.

Finally, the steam test for 5643, originally scheduled for last Friday, has been postponed pending the acquisition of some replacement firebars. Colleagues at Embsay have this is in hand and the steam test should be carried out shortly.

We start this week with the good news that the NDT on 5643’s firebox tubeplate, required by the boiler surveyor as part of the 14 month dry examination, revealed no traces of cracking and preparations are well in hand for the second part of the examination, the steam test, to take place at Embsay this Friday, 14th February. New fusible plugs and stay nuts have been acquired from South Coast Steam and it is planned that these will be fitted tomorrow, Tuesday.

Much sadder news from Embsay has been the passing of Charles Adams last Monday, 10th February, after a brave fight against cancer. Charles had been a stalwart of the Yorkshire Dales Railway (as it was previously known) for around 45 years and was in recent times the railway’s Footplate Standards Manager. Charles joined the Furness Railway Trust last year and became the guardian of ‘Austerity’ 0-6-0ST Cumbria which is currently on hire to the Embsay & Bolton Abbey Steam Railway. With assistance from others, Charles successfully worked to cure the leaking regulator valve which was very much appreciated. Our condolences go to Charles’ family.

Back at Preston Alan and Ade have been fitting a new dome joint on FR 20’s boiler in readiness for its forthcoming hydraulic test.

Underneath FR 20’s tender, John Dixon and Roger have re-fitted the vacuum pipe with its new custom made brackets. John is seen making use of the new access hole in the “boot”.

Another job on the list of things to do was to look at the two water shut-off cocks located on the sumps below the tender tank, the problem being that they have stiffened up with rust over time and are now impossible to do the job for which they were intended and actually shut. They have been removed and are undergoing attention from John.

There has been more assembly of Fluff and Phil Bell has been fastening down more of its platework.

More bits of Fluff have been dragged out from store in the outer shed area and Fred is seen making the best of the brighter weather on Friday cleaning up a sand box.

The FRT seems to be getting more and more involved with the RSR’s coaching stock, with Mike Rigg having taking on the C&W role. Seats on TSO 5036 have been removed for re-covering.

The professionally refurbished seats are now returning and John Davis and Mike Rigg are seen busy loading them aboard ready for re-fitting.

As ever, work has also continued on Wootton Hall and Keith is seen here fitting some newly formed copper pipe.

Finally, avid readers will remember the visits to our shed by local artist Gavin Redshaw, who has been preparing sketches of Caliban in preparation for a forthcoming exhibition at the Harris Museum and Art Gallery. That full exhibition opens this weekend – and full details are available here.

Work continues apace on the Trust’s projects at Preston.

FR 20’s tender is steadily changing colour as Tim progresses with the Furness Railway paint scheme. Underneath, John Dixon has been drilling holes to fix  the new vacuum pipe carrying brackets.

Ade and Alan spent some time on Wednesday removing the valve seats from FR 20’s dome for machining. The seats had previously been pressed into the dome so it took some persuasion to remove them, but with ace dismantler Ade to hand, we shouldn’t have worried!

Just to demonstrate that dismantling isn’t Ade’s only talent, we include a welcome photo of him fitting one of Caliban‘s springs.

Work continues on Fluff and here we see John Davis cleaning up one of the window frames, with the trunk from ‘Nellie’ the fume extractor in close proximity.

Keith has been busy fitting more pipework to Wootton Hall. He is seen here under the cab floor with the vacuum pipe that links the brake valve to the tender vacuum cylinder.

Finally, the NDT examination of 5643’s tubeplate was carried out last Wednesday and, at the time of writing, we await the boiler surveyor’s prognosis.

Just a short update this week. Projects continue to tick along but still with some way to go to the finishing line for any of them!

John Dixon has continued his quest to up-rate the quality of the vacuum system fixing brackets on FR 20, having now remade all of them from scratch from steel off-cuts. They are now in the process of being painted.

Tim has concentrated his time this week painting FR 20’s tender, which is now rapidly changing colour.

Alan has continued the task of  preparing FR 20’s boiler for a hydraulic test and is seen here removing the brass safety valve casting from the top of the dome.

Ade has been working on Caliban‘s axleboxes and there has been further progress on Fluff.

Keith has been welding up the new pipe which stretches from Wootton Hall‘s four cone ejector to the smokebox and he has also been preparing the new screw reverse baseplate for welding by Ian Massey.

Finally, the proof copy of The Iron Horse magazine has now been read and corrected so the magazines will probably be with us later this week for posting out to members.

Plenty of photographs this week as our working members get to grips with a variety of projects.

Work on FR 20 continued with Alan spending time preparing joints for the boiler blanks. Beneath FR 20’s tender, Roger and Phil Bell (seen here) have been cleaning and painting the underside of the frames and tank.

John Dixon has decided to upgrade the brackets which support the vacuum pipe which runs below the engine and the tender. This was put together rather hastily at the beginning of 1999 and is now being brought up to a standard befitting of such a venerable locomotive. John is seen here at work tidying a piece of steel  with a file….

…. before bending it into shape with the aid of some heat.

John Davis has been cleaning up the journals on Fluff‘s wheelsets with the aid of some emery cloth.

Fred has been studiously painting Fluff‘s lubrication oil boxes.

Paul and Martin from the Ribble Rail staff helpfully arranged to shunt FR 20’s boiler out of the heated part of the FRT shed on Friday which allowed Caliban‘s wheels to be hand shunted into position in front of the frames. Caliban‘s own boiler on a lowmac was then positioned in front of the wheels so that work on it can commence when resources permit.

The newly purchased hydraulic table lift was unpacked and, for once, needed little assembly before being tested in readiness for future use.

There were productive working parties over at Embsay on Thursday and Saturday. Keith, Fred and George attended on Thursday, dismantling and cleaning the areas that the boiler surveyor needed to access. Keith and Fred returned on Saturday to be joined by Mike and Ed.

Keith removed both valve covers in order to assess the play in the valves.

Ed concentrated on cleaning the cab area.

Fred polished up the brightwork.

Mike gave the coupling rods a good clean.

The boiler surveyor conducted a formal 14 month examination of the boiler today and passed it fit for further use subject to an NDT examination of the bottom of the firebox tubeplate. Arrangements will be made for this to take place as soon as possible. In the meantime, thanks to all those of you who braved the January weather to prepare 5643 for the survey.