Furness Railway Trust blog

As reported in last week’s blog, the seven wheelsets that were sent away for machining have returned and the photo shows a grand line up outside the FRT shed with the new tender tank for Wootton Hall in the background.

Left to right are the three wheelsets from the Hall’s tender, Caliban’s two wheelsets and then those for FR 25 which weren’t sent away.

Inside the shed were FR 20’s newly machined tender wheelsets which were being readied for painting.

Wednesday saw Fluff’s engine removed from its frames to the RSR workshop for overhaul. It was a tricky operation in confined spaces so hats off to Alan Vernon who is seen here reversing the fork lift truck back down the shed after the successful lift.

The engine-less frames looked pretty rusty but it wasn’t long before members started to attack the rust ready for preventative paintwork to be applied.

Phil Scales was attacking the rust on the outside of the frames with a needle gun on Wednesday.

Meanwhile Phil Bell was to be seen cleaning FR 20’s motion.

Steve Davies, former director of the National Railway Museum paid us a visit on Wednesday with a Japanese party who are in the process of building a old replica train back in Japan. They had spent the previous day at Embsay and been hauled there by the Trust’s ‘Austerity’ Cumbria.

Keith was busy making up a new piece of plate for Wootton Hall‘s tender tank.

On Friday Bob Thomson was working on a component for Wootton Hall‘s new reverser.

Roger Benbow is seen here continuing his work on painting the crinolines for FR 20.

Over at Embsay the washout and maintenance work for 5643 has been proceeding. Keith and Fred completed the main washout work on Saturday, which itself proved to be a washout and caused our volunteers to get very wet! 5643’s boiler has now been boxed up and filled with water, but Keith will be heading back to Embsay again on Thursday to attend to some maintenance issues in the smokebox.

Whilst at Embsay this week, Keith learned the sad news of the death in April of Charles Boylan at the age of 65. ‘Big Charlie’ as he was affectionately known came to Haverthwaite in the late 1970s with a group from Embsay and subsequently went on to be employed at Haverthwaite before working at the Dolly Blue Mill. He then joined the Cumbria Police up the west coast before transferring to the British Transport Police at Preston. On retirement he became a teaching assistant. Charles had continued to volunteer at Embsay, with the P Way Gang, but also confessed to having played Father Christmas on the Santa Specials. Charles was a big affable guy with a great sense of humour and we are sure that he will be missed at Embsay. Our condolences go to his wife Christine and family.

We are back after the Bank Holiday break with a short update.

Work has continued on the various ongoing projects at Preston.

John Davis is seen here driving out rivets on the shovel plate in the new tender tank for Wootton Hall.

Howard has been measuring up for new axle box lids for Caliban.

Paul Balshaw is seen scraping rust from Fluff‘s frames.

Examination of FR 20’s cylinders and piston rings has continued with some debate now as to whether the rings actually need changing. Underneath, the job of cleaning frames and motion continues.

Alison provided us with some leftover cakes a week last Wednesday from the previous night’s Trustees’ meeting, a photo of which we include for Adrian’s benefit(!).

The seven wheelsets that were sent away for machining were finally delivered back to Preston last Friday afternoon, which will open the way for further work on Wootton Hall‘s tender, FR 20’s tender and Caliban.

Finally, over at Embsay, Keith and Fred have been undertaking a wash-out on 5643. Keith will also be going back this Thursday and next weekend to attend to a leaking gasket on one of the superheater elements and to prepare 5643 for traffic again. Meanwhile, as locomotives do when they know that you are dependent on them, Cumbria broke a spring which took two days of hard labour for Embsay’s gang to sort over the last weekend.

 

With Cumbria now safely delivered to the Embsay & Bolton Abbey Steam Railway last Monday, it was time this week for the Trust’s working members to concentrate on other jobs at Preston. The following photos give a flavour of what has been going on.

Fluff‘s brake shaft, which controls the brake rods that apply the brake shoes, has been proving difficult to rotate. In short, it has seized up because of lack of use. The application of a 14lb sledge hammer proved to be fruitless so Phil Bell decided that it would be helpful to re-mount the hand brake handle and pedestal to apply pressure and we are pleased to be able to report that this was a success.

The seven wheelsets that were sent away for machining are due to be picked up from Coalville next Wednesday and are likely to be delivered to Preston the following Wednesday. In anticipation of this, John Dixon has been cleaning the underside of FR 20’s tender so that it can be painted before the wheelsets are fitted.

Keith has been cutting up the last portions of the base from Wootton Hall‘s old tender tank….

…. while Fred has been applying black gloss paint to the upper inside parts of the new tender tank….

…. meanwhile, John Davis has been removing rivets from the bottom of the tender tank coal space so that new plate can be fitted….

…. finally, the new water hose connectors for Wootton Hall‘s tender have been made up and await silver soldering of the flanges.

The Trustees meet tomorrow evening at Alison’s house in order to tackle the usual mountain of refreshments as well as to agree and approve the Trustees’ Annual Report and Accounts for 2018. Hopefully it will also be possible to set a date for the Annual General Meeting.

Advance notice here that there won’t be a blog next week because the editorial team is taken up with other duties during the Bank Holiday and half term week – OK there’s a holiday beckoning!

Ade got up bright and early again last Wednesday to put Cumbria over the pit at Preston before putting a small fire in the firebox ready for a test steaming. Alan and Tim then dismantled the left hand piston rod gland and found the metallic packings to have fragmented, confirming this as the cause of a steam leak when the loco was under load. Soft packing material was located and fitted prior to steam being raised to maximum. Tim and then Ade took Cumbria for trips up and down the yard in order to test the new packings and the steam brake before Ade loaded up the spare springs.

Friday saw John Davis and Phil Bell descend on Cumbria to clear the coal bunker and to give it a final clean and polish. Tim meanwhile removed the lubrication pipes to the piston rod and valve spindles to be cleaned out. The oil pots were replenished with fresh oil and the trimmings cleaned, primed with oil and replaced to give a steady satisfying drip of oil over the rods and spindles.

Work has again continued on Fluff, FR 20 and Wootton Hall. Fred is seen here painting Wootton Hall‘s tender tank in between heavy showers of rain. News from Leicestershire is that machining work on the wheelsets for Caliban and the tenders for Wootton Hall and FR20 has been completed and arrangements are now being made for their return to Preston. One of the additional tasks undertaken was removing a score from one of the crank pins on Caliban‘s wheels. Jeff at CMS Cepcor kindly sent us this short video of the crank pin being machined – click on this link to view.

Today saw Cumbria loaded and despatched to Embsay where it will join the Trust’s GWR 0-6-2T No. 5643. We show here a photo of 5643 double heading with Illingworth, also a recent temporary resident at Preston, courtesy of the Embsay Locomotive Department Facebook page.

 

Just a very brief Bank Holiday update for you.

More work was carried out on FR 20’s engine frames, including the chipping away of loose concrete on the cylinder block by Phil Scales.

Alan spent some more time investigating Cumbria‘s left hand clackbox to try and eliminate any showing of steam at the injector tail pipe. It is proposed on Wednesday to re-pack the left hand piston gland, which started to blow over the RSR’s Steam Gala, before conducting another steam test. It is expected that Cumbria will be then heading off to Embsay shortly to join the FRT’s 0-6-2T 5643 for the season.

Ade and Mike set about moving 0-4-0DM Fluff last Wednesday afternoon in order to position it over the pit. Stanlow was brought around from the running shed and, after a complicated set of moves, Caliban‘s boiler was moved out of the shed and then Fluff took its place. This should enable the engine to be lifted for overhaul.

As ever, Keith has been busy with Wootton Hall and is seen here measuring up the cab.

We must mention the sad news that Fylde based folk singer, Alan Bell, passed away a week last Thursday at the age of 84. Alan wrote many fine songs, including the much-covered “Bread and Fishes”, and was Director of the long running Fylde Folk Festival, to which the FRT supplied sound personnel and equipment for 17 years, which in turn helped the Trust’s coffers. Alan’s funeral is at Carlton crematorium at 10.30 this Friday.

Finally we cannot go without resolving the mystery photo from 7 days ago!

Mike Rigg’s shot was taken through one of the holes made in Caliban‘s buffer beam to enable the cylinders to be re-bored.

 

The job of re-boring Caliban’s cylinders was finished last Tuesday by Team Marrow, which marks the completion of another important stage in its overhaul.

Ade got himself out of bed at an early hour to light up Cumbria (thank you, Ade) so that it could undergo a pre-hire inspection in steam by Tony Wright of the Embsay & Bolton Abbey Steam Railway. All went well and Cumbria then went on to appear at the RSR’s Spring Steam Gala on Saturday and Sunday. It is seen here being prepared on Sunday morning and also at the head of the 11.30 train from Riverside station on Saturday with Hudswell Clarke 0-6-0ST No. 1208 Illingworth (also bound for Embsay in the near future) on the rear.

A myriad of jobs have been taking place at Preston. John Dixon has been measuring up one of Wootton Hall‘s tender axleboxes so that he can make a pattern for a casting to repair some damage.

John Davis has been spending more time working on Wootton Hall‘s new tender tank.

Tim has again been cleaning up FR 20’s frames whilst Roger Benbow set to work on cleaning up the crinolines for FR 20’s boiler.

Fred has cleaned up the platform ticket machine pedestal ready for it to be re-painted.

Work has also continued on Fowler 0-4-0DM Fluff where a replacement running board support, fabricated by John Stewart, has been fitted.

Over at Embsay, 5643 has been busy turning its wheels again and we have an Instagram photo here of it on a dining train there.

Also, Mike Rigg has submitted a mystery photo for you identify. Answer next week.

Finally the fruits of our Treasurer’s work on the 2018 accounts have been delivered today to the Independent Examiner for scrutiny. We shall no doubt have to fix up an AGM soon.

Just a brief post-Easter update this week for you…

Work at Preston last Wednesday concentrated on following up issues brought to light from the test steaming of Cumbria two days earlier. Alan is seen here peering into the fireman’s side clackbox to try and identify the cause of a small steam pass.

John Dixon spent an uncomfortable time underneath the loco on replacing cotters which hold the ashpan in place. He then set about cleaning out the slide bar trimmings on Friday. Cumbria is due for another steam test tomorrow (Wednesday) and is then due to take part in the RSR’s Spring Steam Gala this weekend. After that, if all is well, it should shortly be heading off to Embsay to join the FRT’s GWR 0-6-2T No. 5643 which is currently holding the fort there until reinforcements arrive.

Work on our Fowler 0-4-0DM Fluff continues and it is hoped to lift out the engine in the not-too-distant future, assuming that a shunt can be arranged.

Finally, outside the shed, work has continued on cleaning off and painting of Wootton Hall‘s recently purchased tender tank. In action on this are Phil Scales and John Davis (above) and Ed Tatham (below).

 

The Trust’s ‘Austerity’ 0-6-0ST Cumbria was once again the centre of attention this last week as final preparations were made for a test steaming. The loco had a second washout on Wednesday and the mudhole doors and washout plugs were refitted. Alan finished fitting the regulator quadrant and John Dixon is seen here fitting the driver’s side water valve.

Phil Scales and Phil Bell continued the task of sprucing up the appearance of the loco with the latter touching up the black paint on the nameplates.

On Friday Ed pulled Cumbria out of the shed, cleaned the firebox and emptied the ashpan. The boiler was also filled but it was decided to delay the test steaming until today when there would be more people to assist and more time for testing.

Ade appeared bright and early this morning and had Cumbria lit up by 8.15. Steam was raised just after 1.oo and the pressure brought up slowly. Tim and Matt Jervis were looking at the drain cocks closely with fingers crossed as steam built up, to detect whether the regulator or ‘J’ pipe were passing steam, but all was well. The afternoon was spent chasing up steam leaks on cab fittings and then moving the loco to test the regulator and brakes. Tim is seen here tightening up the brake steam pipe to the manifold whilst Alan looks on.

On the whole the exercise was deemed to be a success although there is a list of things to follow up on Wednesday when the engine has cooled down.

A notable arrival this week has a package with the castings for Wootton Hall’s gauge frame.

Finally, when Tim went to the NRM at Shildon on Saturday for a training day, he came across an upstand advert inviting volunteers to work with the NRM’s historic collection featuring none other than Alan – is he now officially part of the NRM’s historic collection, we wonder?!

The main centre of activity this week has once again been the Trust’s ‘Austerity’ 0-6-0ST Cumbria as members have expedited the completion of the remainder of the winter maintenance programme. The key event on Wednesday was the task of re-installing the ‘J’ pipe and regulator valves. The photo shows John and Ade in the process of pushing the extremely heavy ‘J’ pipe rung by rung up a ladder whilst Phil Bell hauls on the safety rope to prevent it from dropping back down the ladder. It was a little unconventional, but was deemed to be the safest method – and what’s more, it worked. Matt Jervis was on top of the saddle tank to receive the ‘J’ pipe and secure it back on to the main steam pipe. By the end of Wednesday all was ready for the dome cover to be re-fitted, which was achieved on Friday.

Alan tackled the job of re-fitting the regulator stuffing box on Friday and John Dixon had completed the servicing of the water valves. Phil Bell and Roger re-fitted the balance pipe after a through clean. The last job on Friday was the completion by Tim of the fresh coat of black paint on the running board and cab steps that had been started on Wednesday by both Phils.

Russ Walker kindly offered to arrange the movement of Cumbria around to the running shed on Saturday morning so that a further wash-out can be carried out this week, the plugs and mudhole doors be re-inserted, and (hopefully) a fire lit. It will be a case of fingers crossed as we check out the results of everyone’s labours over the past three months.

Cumbria has been replaced in the shed by Caliban‘s boiler, which can be seen here with FR 20’s boiler in the background.

Work has, as ever, continued on Fluff, the former L&NWR platform bench seat, and Wootton Hall‘s tender tank, which has now received a fresh coat of undercoat green on the first side to be cleaned off.

 

Bryn Engineering started the re-bore of Caliban‘s cylinders last Tuesday and continued into Wednesday. There is still some work to be completed which will be done shortly.

The main focus of activity has been on Cumbria which needs to be back in traffic at Embsay as soon as possible. Tim has completed his work on the ‘J’ pipe valve faces and Bill Norcross has machined two new bolts to hold the ‘J’ pipe in place which replace existing bolts with worn threads. It is hoped to be able to put this all back together this next week.

The clack on the newly refurbished fireman’s side clack box has been ground in and Alan Middleton has silver soldered a new joint on to one of the brake valve pipes. Again, the brake valve should be re-mounted this next week.

The running board and cab steps have received a coat of grey undercoat paint, courtesy of Phil Bell (pictured) and Roger.

Outside, work has continued on cleaning old paint from the new tender tank for Wootton Hall. Six repaired and two new springs for the tender have been delivered to Preston, and news from CMS Cepcor in Leicestershire is that the wheelsets have been in the lathe for re-profiling.

John Dixon undertook a variety of minor work on FR 20’s frames whilst anyone else spare this last week has continued the work on Fluff‘s frames.

Finally, over at the Embsay & Bolton Abbey Steam Railway, 5643 was, as planned, in steam for Mother’s Day.